Ok, Found an issue with my boat, If I can make it tonight, I'll be in the Holsett.
U-6 Holsett Valvoline Miss Madison
I've been running the Sim for a few weeks now and I've gotten most of it down, but I do have a couple of questions.
#1 Steering Lock - I'm running a G27 with a rotation of 540, I've been told to lower that to turn better I've been as far down as 180, but whats a good Wheel rotation rate for these boats?
#2 Canard - Up down? Watching the real guys run, they all seem to "flatten" or "raise" the Canard as they pick up speed. The Oberto seemed to be running full "flat" at Seafair, but that could just be an optical thing with the camera. Anyway, the real guys seem to be running flat at speed and then almost fully dropping the Canard in the corners. However, the sim seems to be different, I have to play with it on the straights and flatten it at turn in and then let it drop through the corner and then flatten it out again as I exit. Any tips on what the proper Canard trim should be?
#3 Corners - Simply, do I lift for the turns or not? I know the Roostertail at Detroit you have to lift for and I have to lift to hold the Buoy line in the corners, but I'm not sure of the other turns. Onboards don't seem to be of any help as it sounds like they're fully on it the whole time. Also, what kind of speeds should I expect in the turns?
I think that's it for now, I know I'll have more questions later.
@Fitch The U-6 Valvoline/Miss Madison is not available in the game yet.
Here is a Dropbox filled with paint schemes to choose from.
Hmmmm....It's in my game, any idea where it came from then?
Anyway, let's go with U-6 Miss Madison 1999
EDIT: Ok, I figured where I got it from, Craigmont posted it in the Dropbox thread.
Looks like your connection to Unlimited Hydroplane League was lost, please wait while we try to reconnect.